Manual Feed Faxing; Broadcast Faxing - Oki MC860 Manual Del Usuario

Walk-up Operation
Fax (cont.)

Manual Feed Faxing

If you need to send multiple sets
of documents from the ADF or
manual scanner glass:
1. Load the document (see pages
6 and 7).
2. Press the F
AX
Fax Ready
up the
3. Press Others
Cont. Scan
then press
4. Select ON and press
Close
5. Press to return to the
Ready screen.
6. Use the touch screen to set
send properties as required.
7. Enter the fax destination(s) as
described in the box to the
right.
8. Press the M
scanning.
9. Once the current scanning
operation is complete, "Set
next document" appears.
a. To scan in additional
documents, press
page
.
b. If you are done scanning,
Start sending
press
button to bring
screen.
on the screen,
.
Enter .
button to start
ONO
Scan next
.

Broadcast Faxing

You can send a fax to multiple
locations at the same time. By
combining abbreviation dials,
groups and using the numeric
keypad, you can specify up to
530 destinations.
1. Load the document (see pages
6 and 7).
2. Press the F
3. Enter the destination fax
numbers:
Fax
• Use the numeric keypad (up
to 30 numbers can be
entered this way), then press
Enter, or
• select numbers from the
speed dial list, or
• press Others on the touch
screen, then press Group Tx
and select from the group
list.
4. Use the touch screen to set any
desired parameters (e.g.,
delayed transmission time).
5. Press the
16 English
•
button.
AX
button.
M
ONO