Quick Setup - TP-Link MR200 Guía De Instalación Rápida

English
Customize the 4G LTE Router
1 Make sure your computer is connected to the router (via wired or wireless).
2 Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web browser. Based on the actual web
management login page : use the default admin for both username and password or create a new password
to log in.
3 Follow the step-by-step instructions on the
Note: The router can also be used (or configured) in wireless router mode for ADSL/Cable connections. For more information, please refer to the User
Guide at www.tp-link.com.
FAQ(Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
• Verify that the computer is set to obtain an IP address automatically from the router.
• Verify that http://tplinkmodem.net
• Use another web browser and try again.
• Reboot your router and try again.
• Disable and then enable the active network adapter and try again.
Q2. What can I do if I cannot access the Internet?
• Verify that your SIM card is an LTE, WCDMA or GSM card.
• Verify that your SIM card is in your ISP's service area.
• Verify that your SIM card has sufficient credit.
6

Quick Setup

page to complete the initial configuration.
or 192.168.1.1 is correctly entered in the web browser.