Alesis IO 14 Manual De Inicio Rápido Para El Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Install Cubase LE (optional)
If you are interested in using Cubase LE as your multitrack Digital
Audio Workstation, install it from the CD now.
Connect your IO|14/26
Now, connect your IO|14/26 to your computer using a Firewire
cable. Watch for one of the lights on the unit to turn on within a
few seconds. If a light does not turn on—or if you are using a
notebook computer with a small four-pin Firewire connector—
plug in the external AC adapter.
Windows users:
Windows will recognize the IO|14/26 and start the Found New
Hardware wizard. The installation process will automatically install
these drivers one by one.
When you are prompted whether to install the drivers
automatically or search for a specific location, choose to install
them automatically.
If you are asked whether you want to connect to the Internet to
check for the latest driver, choose not to.
Let the installer continue installing the various sets of drivers until
you see a message stating, "Your new hardware is installed and
ready to use." Do not cancel any of the installations, as they are all
required for proper operation.
Begin using your IO|14/26
You are now ready to begin using your IO|14/26.
For further information, please consult the reference manual.
7-51-0211-A
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Io 26

Tabla de contenido