Tabla de contenido
Publicidad
ENGLISH
PARTS
1. On/Off/Turbo switch
2. Blade set
3. 2 attachment guide combs 1 – 21mm
and 24 – 42mm, 3mm (not shown)
4. Blade release button
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Before using your hairclipper for the first time, charge for 14-16 hours (HC7130) and 2
hours (HC7151).
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
If the product is not going to be used for an extended period time (2 – 3 months),
unplug it from the mains and store.
•
Fully recharge your hairclipper when you would like to use it again.
•
Allow for 14-16 hours for a full charge for HC7130 and 2 hours for HC7151.
•
HC7130: when charging the LED indicator will be illuminated and will remain
illuminated once the product is fully charged.
•
HC7151: when charging the LED indicator will be illuminated and will turn off once the
product is fully charged.
•
To preserve the life of your batteries, let them run out every 6 months then recharge for
14-16 hours.
•
The HC7151 comes with a quick charge function, 10 minutes charging will give an
emergency burst of run time.
CHARGING VIA STANDARD ELECTRICAL SOCKET
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains.
USB
Connect Micro USB to the appliance, and the USB connector to any standard USB port or
charger
Product will only charge through USB and will not run in corded mode.
CORDED USE
Connect the charging adaptor to the product then to the mains.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
When the unit is switched on and fully charged, the product can be used in cordless mode
for up to 60 minutes for the HC7130 and up to 75 minutes for the HC7151.
4
5. Charging indicator light
6. Micro USB port
7. Adaptor (not shown)
8. Slide select adjustable comb switch
Publicidad
Tabla de contenido
