Tabla De Contenido; Intended Use - Makita UH004G Manual De Instrucciones

Intended use

The tool is intended for trimming hedges.
Noise
Applicable standard : EN62841-4-2
UH004G
UH005G
UH006G
UH007G
UH008G
UH009G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
UH004G
UH005G
UH006G
UH007G
UH008G
UH009G
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Model
Model
Sound pressure level
L (dB(A)) Uncertainty K
pA
(dB(A))
85
86
81
81
82
83
Front handle
2
ah (m/s ) Uncertainty K
(m/s
2.9 1.5
3.1 1.5
3.0 1.5
3.4 1.5
3.1 1.5
3.2 1.5
9 ENGLISH
Sound power level
L (dB(A))
WA
3 96
3 97
3 92
3 92
3 93
3 94
Rear handle
2
ah (m/s )
2
)
2.5 or less
2.7
2.5 or less
3.1
2.5 or less
2.5
Uncertainty K
(dB(A))
3
3
3
3
3
3
Uncertainty K
2
(m/s )
1.5
1.5
1.5
1.5
1.5
1.5