Conceptronic CSATAI23U Guía De Instalación Rápida página 12

ENGLISH
5.3 Starting a backup
When you configured the backup software (see chapter 5.2), you can initiate a backup
with the backup button on the CSATAI23U.
When you press the button, the following message will be shown:
Press the Backup button again or
click "Start" with your mouse.
The Backup procedure will be
started.
When the backup is finished, the following message will be displayed:
Click "OK" to close the message.
Note: After the backup procedure, it is possible that you will see a Log File showing
"Backup Failure" with a list of files.
These files are in most cases files which are currently in use by other
programs.
To backup these files, check which programs use these files and close the
programs before you initiate a backup procedure again.
Note: For more detailed information about the backup software, use the "Help"
function in the software or view the "Backup Software Manual" on the
CD-ROM.
Enjoy the use of your CSATAI23U !
12