Symbols Used In The Instructions; General Safety Directions For Power Tools - ULTIMATE SPEED UPM 120 B1 Traducción Del Manual De Instrucciones Original

GB MT
Wear breathing protection
Wear ear protection
Do not expose the unit to rain.
Remove the plug from the mains.
Immediately if the cable is dam-
aged or cut.
Safety class II (Double insulation)
Electrical machines do not belong
with domestic waste
Guaranteed sound power level

Symbols used in the instructions:

Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol with information
on prevention of harm / damage.
Pull out the mains plug.
Connect the machine
to the power supply.
Notice symbol with
how to handle the device properly.
General Safety Directions for
Power Tools
WARNING! Read all safety
warnings, instructions, il-
lustrations and speciications
provided with this power
tool. Failure to follow all instructions
listed below may result in electric
shock, ire and/or serious injury.
38
information on
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings re-
fers to your mains-operated (corded) power
tool or operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of lammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
ied plugs and matching outlets will
reduce risk of electric shock
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators. There is an in-
creased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.