Abicor Binzel ABITIG GRIP 260 Instructivo De Servicio página 12

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
2 Technical Data
3 Safety Instructions
3.1 Classification
3.2 Emergency information
4 Putting into operation
4.1 Equipping the torch
4.2 Shortening the tungsten electrode EN-6
4.3 Connecting the cable assembly
4.4 Setting the shielding gas quantity EN-7
EN - 2
EN-3 5 Operating elements
5.1 Trigger 2-cycle function
EN-3
6 Operation
EN-4
EN-4 7 Putting out of operation
EN-5
8 Maintenance and cleaning
EN-5
EN-5
EN-6
TIG welding torch
EN-8
EN-8
EN-8
EN-8
EN-9