Preset Programmes - BestFor BISTROT 433 Manual De Instruccion

To exit the menu, press the
control.

Preset programmes:

The electronic control of the BestFor Series ovens contains 12 preset baking programmes which
are suitable for cooking various types of food. These programmes can be called up using the
following procedure:
• Press the
Confirm the selection by pressing the
• Select the degree of baking, increasing or decreasing it (using the keys "+" and "-", within
the range permitted by the program), the baking parameter will flash as follows:
• Press the
will be effective for this baking cycle only. To make the programme change permanent,
on the other hand, press the
indicated by an acoustic signal.
• To start execution of the programme, press the
programme, the baking parameters will not be modifiable. You can stop the baking
cycle before it's programmed to end simply by using the
• To exit the menu, press the
the control.
The preset programmes included in the oven's electronic control are listed below. Follow the
procedure described above to execute them.
Legend of the Recipe Book Symbols:
• = suggestions for excellent baking results.
• = Parameter which can be changed within the range allowed by the programme.
key. In this manner, you will return to the main menu of the
key and select the desired baking programme using the "+" and "-" keys.
= if the baking is time controlled.
= if the baking is time controlled, but the program requires the
= if the baking is controlled exclusively by the core probe.
key to confirm the modification of the baking time. The aforesaid setting
key. In this manner, you will return to the main menu of
key.
insertion of the probe in the product.
key for 3 seconds. The successful modification will be
Bistrot/Gourmet Series Ovens– Page 37
key. During execution of the
key.