Sauder 412116 Manual Del Usuario página 12

Step 6
Fasten the HALF DISKS (GG) to the LOWER PLINTHS (DD).
å
Use three BROWN 1" FLAT HEAD SCREWS (HHH).
Fasten three BRACKETS (XX) to the LEFT END (B) and
å
LEFT UPRIGHT (F). Use three BLACK 9/16" LARGE
HEAD SCREWS (NNN).
Fasten a LOWER PLINTH (DD) to the LEFT END (B). Use two
å
BLACK 9/16" LARGE HEAD SCREWS (NNN).
Use bottom hole
GG
DD
XX
BLACK 9/16" LARGE HEAD SCREW
(5 used for the BRACKETS)
Page 12
Be sure the END MOLDING is
centered on the HALF DISK (GG).
B
NNN
The larger hole
should be facing up.
GG
DD
XX
412116
GG
DD
DD
HHH
BROWN 1" FLAT HEAD SCREW
(3 used for the HALF DISKS)
F
www.sauder.com/services
GG