"Hold" Button; Reading The Display; (Dwell) - Facom 706 Manual De Instruccion

«Hold» button
A value can be saved in the memory by pressing the «HOLD» button. The saving
message, «HOLD» then lights on the LCD.
To cancel this memory press the «HOLD» button again.

Reading the display

HOLD
AC
BAT
HOLD Saving indicator
BAT Battery wear indicator
AC Alternating current indicator
Negative value indication
1 or -1 Range overrun indicator
. 2
Max range value 2 units
. 20 Max range value 20 units
. 200 Max range value 200 units
Connections to the tester
10A
Black wire: plug the black plug into the COM socket
Red wire: For voltage measurements under DC or AC, and resistance, diode, or
CB point measurements, insert the red plug in the socket marked V Ω
For dwell angle and tachometer measurements, insert the red plug in the socket
marked DWELL TACH
For DC current measurements, insert the red plug in the socket marked 10A
2
(battery capacity <20%)
DWELL.TACH
250V MAX
MAX 10A
FUSED
20
COM
MAX
1000V
750
MAX
500V
706
200
V.
11