Loop Devices; Features - Honeywell RZT 8000 Instrucciones De Instalación

1.1

Loop devices

1
2
5
Fig. 7: Loop devices

Management system
 Fire brigade operating panel

FACP
 ®
esserbus transponder

Third-party detector connecting module RZT 8000
 Detectors different manufacturer (third-party detector)
2

Features

The RZT 8000 third-party detector connecting module has four detector zones inputs and two relay outputs.
It may be used for connecting four additional standard detector zones with non-addressable third-party
detectors to the loop. The two relay outputs are available for general control purposes.

Output current max. 125 mA per detector zone

The detector states "prealarm" or "detector fault" may also be displayed.

Variable reset delay of the detector zone (0 to 15 seconds)

The detector zones can be operated in 'dual-detector dependency type B'

Two relays with programmable operating modes

Programmable with the service and programming software tools 8000

Monitoring of the external power supply is possible

The 24 V DC detector zone voltage is generated inside the module (808630.10 only)
FB 789807.10 / 05.17
Refurbishment Zone Transponder RZT 8000
3
esserbus ®
esserbus ® PLus
6
4
19