Worx Sonicrafter WX686 Manual Del Usario página 10

APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Sawing
Sanding
10
Rasping
Removing
grout
Scraping
We recommend that you purchase your accessories listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw
Oscillating Multi-Tool
Pic Description
Extended Life Carbide
Extended Life Bimetal Metal/
Wood End Cut Blade
Precision Wood Cut Blade
Wood End Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger Shaped)
Carbide Grit Semicircle Saw Blade
Diamond-Coated Semicircle Saw
Blade
Rigid Scraper Blade
Flexible Scraper Blade
Application
Metal, hardened nails and screws,
tile, rebar, cement backer board
and other heavy duty applications
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers
Fast Cuts in wood, plastics
Wood, plastic, drywall
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet
metal, hardened fillers, window
glazing
Wood, plastic, hardened fillers
Wood, plastic, hardened fillers
Wood, hardened adhesives, thin
set, masonry
Wood, hardened adhesives, thin
set, masonry
Grout, porous concrete, masonry
Ceramic and stone tile,
backerboard
Old paint, hardened adhesives,
caulk, carpet
Elastic sealants, paint, adhesive
residues, carpet
EN