Axis Communications P3364-LV Guia De Instalacion página 19

1
Locking screw
2
Lens holder
3
Marking (design A)
4
Marking (design B)
2. Loosen the locking screw.
3. Check the Live View page and turn the lens holder to rotate the lens 90° or 180°.
4. Once satisfied, gently tighten the locking screw to secure the lens holder's position.
Tilt the Lens
1. Open the Live View page, see Access the Product on page 22.
2. Loosen the two screws.
3. Check the Live View page and tilt the lens to the desired position.
4. Tighten the two screws.
The illustration shows a model without IR illumination.
AXIS P3364-LV Network Camera
19