Operating Elements And Displays; Operating Panels And Displays; Signal Tones; Overheating Protection Facility - Caso Pro Slide 2100 Manual De Instrucciones Original

14.2 Operating elements and displays

14.2.1

Operating panels and Displays

14.2.2

Signal Tones

14.2.3

Overheating Protection Facility

caso ProSlide 2100
1. Master On/Standby switch
2. Selection button for power stage and timer (+/-)
3. Selection button for timer
4. Booster
5. Special function, above: Keep Warm, beneth: Frying
6. Slide Control for power stsages
The appliance emits an acoustic signal after being switched on
and in the event of a fault.
The appliance is equipped with an overheating protection facility.
If the temperature of the appliance exceeds the critical limit the
appropriate error message is displayed and an acoustic signal
sounds. For safety reasons the appliance shuts off further power
supply. After the cooling-down phase the appliance can be
switched on again.
► Do not place any empty cookware on the cooking area.
Heating an empty pot or pan activates the overheating
protection and the device turns off automatically.
Design and Function
50