Accessories; Maintenance; Storage; Disposal - GMC LJS750CF Manual Del Usuario

Cutting metal
• When cutting metals, a suitable cooling/cutting oil must be used
• Apply the lubricant to the blade or workpiece at regular intervals during
cutting in order to reduce wear on the blade

Accessories

• Accessories for your jigsaw, including blades for different kinds of
materials and cuts, are available from your GMC stockist. Spare parts
can be obtained at www.toolsparesonline.com

Maintenance

WARNING: Always disconnect the device from the power supply before
carrying out any maintenance or cleaning.
General inspection
• Regularly check that all the fixing screws are tight. They may vibrate
loose over time
• Inspect the supply cord of the tool, prior to each use, for damage or
wear. Repairs should be carried out by an authorised Silverline service
centre. This advice also applies to extension cords used with this tool
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the machine's service life. Clean the
body of your machine with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
Lubrication
• Regularly apply a suitable lubricant between the roller and the blade
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure,
or visible sparking
• If you suspect that the brushes may be worn, have them replaced at an
authorised Silverline service centre

Storage

• Store this tool carefully in a secure, dry place out of the reach of
children

Disposal

Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the
correct way to dispose of power tools
13
GB