Technical Support - Tripp-Lite AGPD6684 Serie Manual Del Propietário

Features
A

Technical Support

Website: www.tripplite.com/support
E-mail: techsupport@tripplite.com
15-04-186-93341D.indb 8
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Visit www.tripplite.com for
ordering information.
Note: Do not connect a keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal
connection to a computer with a terminal emulation program. A
serial cable (part number 73-1025) is included with the PDU. If
you need to order a replacement cable, contact Tripp Lite
Customer Support at www.tripplite.com/support.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
C
network with a standard Ethernet patch cable. The Status LED
and Link LED
B
B
the table below. This port is not compatible with PoE (Power Over
Ethernet) applications.
Network Operating Conditions
Status LED Color
A
Off
Steady Green
Flashing Amber
Link LED Color
B
Off
Flashing Amber
Flashing Green
SNMP Reset Button: The SNMP reset button
small opening between the Link and Status LEDs. To reset your
SNMPWEBCARD, use a small tool to press the reset button for 3
seconds. Rebooting the network card will not erase network
settings or interrupt AC power.
indicate several operating conditions, as shown in
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
8
A
is recessed in a
C
4/16/2015 9:19:52 AM