Ryobi P1100 Manual Del Operador página 11

 Lower the upper handle.
 Open the lower handle lock.
 Push outward on each side of the lower handle until it
is free from the slot. Then, fold the handle to the front of
the unit. Avoid pinching or trapping any cables.
INSTALLING THE MULCHING PLUG
(FOR MULCHING OPERATION)
See Figure 4.
NOTE: When using the mulching plug, do not install the
grass catcher.
 Remove start key and battery pack.
 Lift and hold the rear discharge door.
 Grasp the mulching plug by its handle and insert it at a
slight angle, as shown.
 Push the mulching plug securely into place.
 Lower the rear discharge door.
 Reinstall start key and battery pack when you are ready
to mow.
INSTALLING THE GRASS CATCHER (FOR
REAR BAGGING OPERATION)
See Figures 5 - 6.
NOTE: When using the grass catcher, do not install the
mulching plug.
 Remove start key and battery packs.
All manuals and user guides at all-guides.com
ASSEMBLY
 Lift the rear discharge door.
 Lift the grass catcher by its handle and place under the
 Release the rear discharge door.
 Reinstall start key and battery packs when you are ready
SETTING BLADE HEIGHT
See Figure 7.
When shipped, the wheels on the mower are set to a
low- cutting position. Before using the mower for the first
time, raise the cutting position to the height best suited for
your lawn. The average lawn should be between 1-1/2 in.
to 2 in. during cool months and between 2 in. and 3-1/4 in.
during hot months.
To adjust the blade height:
 Remove start key and battery pack.
 To raise the blade height, grasp the height adjustment
 To lower the blade height, grasp the height adjustment
 Reinstall start key and battery pack when you are ready
7 — English
rear discharge door so that the hooks on the grass catcher
are seated onto the slots on the mower housing.
to mow.
lever and move it toward the back of the mower.
lever and move it toward the front of the mower.
to mow.