Installation Options - Bose Professional DesignMax DM3SE Guia De Instalacion

Setup

Installation Options

q
Installation Options and Accessories
q
Mounting bracket (included)
w
DMSBRKT pan-and-tilt bracket (optional; for indoors only)
e
MBPWR-50 pan-and-tilt bracket (optional; for outdoors)
Single In
Preparing the Weather-resistant Input Cover
The weather-resistant input cover is designed for three different wiring scenarios (see above). To change the configuration of the input
cover to support your wiring scenario, cut along the perforation on the rubber conduit.
Note: Indoor-only applications do not require use of the input cover.
4 • English
w
In and Out
Note: If installing the loudspeaker with the rubber conduit facing
upward, it is the installer's responsibility to seal against water
ingress into the Euroblock connector.
Note: If using the wide open rubber conduit configuration, it is
the installer's responsibility to seal against water ingress into the
Euroblock connector.
PRO.BOSE.COM
e
Wide Open
DesignMax DM3SE • Installation Guide