Connection Diagrams; Loudspeaker Settings - Bose Professional DesignMax DM3SE Guia De Instalacion

PRO.BOSE.COM
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM3SE loudspeaker is designed to work with 18 AWG (0.8 mm

Connection Diagrams

Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.

Loudspeaker Settings

Using a Safety Cable
Some regional construction codes require the use of a secondary
method of securing loudspeakers to support structures
to provide additional safety. Choose a mounting position,
method, and hardware consistent with local building codes and
regulations.
A safety cable can be attached to the loudspeaker using the
threaded insert on the back of the enclosure.
The insert is sized for an M6 screw (not included) with a depth of
12 millimeters (0.47 inches).
Installation Guide • DesignMax DM3SE
) to 14 AWG (2.1 mm
2
70V/100V
3W
6W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
) size wire only.
2
8Ω
70V
6W 12W
12W 25W
100V
** NC: No Connection (do not use)
Setup
25W*
8Ω
NC**
English • 5