3.2.3/ STEP 3: FINE SEARCH
When the screen indicates that you are "3 meters" from
a burial, your device will no longer indicate a direction.
At this point you need two conduct a fine search using a
"cross pattern".
Example of fine
search technique
1. Position your device near snow level.
12
1st probing
point
2. Move your device in a cross pattern to locate the point
where the distance reading is the lowest.
Marking function: When you are less
than 3 meters from the burial(s), a
marking icon blinks in the upper right-
hand corner of the screen. Press the
marking button to mark the victim. The
device will start searching for the next
victim without any already marked buri-
al(s) interfering.
In a multi-burial situation, as soon as you mark a victim,
step 1 meter away to prompt the device to more quickly
start searching for the next buried victim. When you mark
a victim, a flag appears next to that victim's icon.
3.3/ AUTOMATIC REVERT-TO-TRANSMIT
MODE
In the event of a secondary avalanche, the automatic re-
vert-to-transmit mode allows the device to automatically
switch back to transmitting a signal. In search mode, the
device will beep every 8 minutes and the "AUTO-REVERT"
icon will appear on screen asking the user to confirm
they would like to continue in search mode. Press on the