ARVA EVO5 Manual De Instrucciones página 5

To turn on the device, push the
OFF/SEND/SEARCH selector
(located on the upper right-
hand side of the device) down
until the lock button mechan-
ically locks it into place (the
white arrow should point to
"SEND").
The selector is properly locked when, in transmit mode,
the lock button pops out and you hear it click into place
and you cannot push it down any further.
When the device turns on, it automatically checks that all
main functions are working properly. Verify that the au-
to-test runs correctly and pay close attention to any error
messages that display when turning on your device.
The device then displays the software version installed
and remaining battery life. We recommend that you re-
place the battery as soon as it drops below 50%. Holding
down the marking button in transmit mode will allow you
to check battery life left at any time.
EN
5