ARVA EVO5 Manual De Instrucciones página 9

3.1/ GROUP AND FREQUENCY CHECK
Before starting your outing, check to make sure that
everyone's device is in transmit mode and working prop-
erly. The group leader should switch their device into
GROUP CHECK mode to check the devices of the other
members in the group.
When turning on the EVO5 in transmit mode, it will
prompt you to switch to GROUP CHECK mode. To enter
GROUP CHECK mode, push on the marking button when
the GROUP CHECK icon is blinking in the upper part of
the screen.
You will then be able to test your partners' devices one by
one by positioning your device 1m away from each device
you check.
In GROUP CHECK mode, the EVO5 starts by analyzing the
transmit frequency. If the frequency does not comply with
current standards, a "no" message will appear indicat-
ing that the device being checked is defective and should
be sent to customer service. If the frequency meets the
standard, a distance reading will display on your screen
PRESS
and you may then proceed to checking transmit power :
1M
9
EN