Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ANT2000 Smart Indoor Antenna
Congratulations on your purchase of the ANT2000 Smart Indoor Antenna. With the
innovation of RCA's Smart Antennas, consumers no longer have to hassle with the manual
movement of "rabbit ears" to achieve the highest quality imagery and sound. Instead, the
technology built into our omni-directional Smart Antenna constantly monitors and gains
feedback from the television and antenna, self-adjusting for maximum entertainment results.
Please note that this antenna must be used with products that have a CEA909 Smart Antenna
connector interface.
ANT2000 Features
The ANT2000 Smart Indoor Antenna is packed with features that make it as functional as it
is attractive:
• Optimizes reception of local Standard Definition, High Definition, and FM signals
• Adjusts automatically for each channel
• Uses phase-array technology for directional adjustments—no motors necessary!
• Employs built-in low-noise amplifier and auto-gain controller for reducing interference and
adding just the right amount of signal enhancement
• Sits discreetly on any flat surface—no mounting required!
Important Antenna Notes
To function properly, the ANT2000 Smart Indoor Antenna system requires the provided
Smart Antenna Module. The Smart Antenna Module is the control center between your TV or
converter box and the Smart Antenna. When you switch channels, the Smart Module works
behind the scenes with the Smart Antenna to find the best signal instantly.
Make sure you follow the connection instructions in this manual to install your Smart
Antenna.
ANT2000 Hardware
The ANT2000 antenna package includes the following items:
1 ANT2000 Smart Antenna
1 Smart Module
1 Antenna Control Cable
1 Coaxial Cable
ANT2000 Smart Indoor Antenna
Antena Inteligente para Interiores
User's Guide
Guía del Usuario
Publicidad
Tabla de contenido
Manuales relacionados para RCA ANT2000
Resumen de contenidos para RCA ANT2000
- Página 1 Please note that this antenna must be used with products that have a CEA909 Smart Antenna connector interface. ANT2000 Features The ANT2000 Smart Indoor Antenna is packed with features that make it as functional as it is attractive: • Optimizes reception of local Standard Definition, High Definition, and FM signals •...
-
Página 2: Getting Started
Getting Started Setting Up the ANT2000 Find the best location for the Smart Antenna. Before you connect the antenna, determine the best spot in your home for optimum reception. Visit www.antennaweb.org to see where your local broadcasts are coming from. Then, try as much as possible to avoid obstructions between these transmitters and your antenna. - Página 3 Getting Started Coaxial Cable Installation Precautions • Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable’s impedance. • Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation.
-
Página 4: Additional Information
Additional Information 12 Month Limited Warranty Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. -
Página 5: Antes De Comenzar
Antena Inteligente CEA909. Características de la Antena ANT2000 La Antena Inteligente para Interiores ANT2000 está llena de características que la hacen tanto práctica como atractiva. • Optimiza la recepción de señales locales de Definición Estándar, Alta Definición y FM. -
Página 6: Para Empezar
Para Empezar Configuración de la Antena ANT2000 Encuentre la mejor ubicación para la Antena Inteligente. Antes de conectar la antena, determine la mejor ubicación en su hogar donde se pueda obtener una recepción óptima. Visite www.antennaweb.org para informarse de dónde provienen las transmisiones locales. -
Página 7: Especificaciones
Para Empezar Precauciones acerca de la Instalación del Cable Coaxial • No doble los cables coaxiales en un radio menor de 7.62 cm. Los dobleces más tensos podrían ocasionar cortocircuitos y modificar la impedancia del cable. • No instale un cable coaxial donde su tensión de tiro sea mayor de 33 kg durante la instalación. -
Página 8: Información Adicional
Todas las demás marcas y nombres de productos Carmel, IN 46032 son marcas comerciales o marcas registradas de sus Trademark(s) Registered respectivos dueños. Marca(s) Registrada(s) Product specifications are subject to change. www.rca.com Las especificaciones del producto están sujetas a cambio. Printed in China Impreso en China ANT2000_IB_00...