Check Package Contents; Hardware Connections; English - Zyxel ISG50 Guia De Inicio Rapido

1 Check Package Contents

• ISG50
• Power cord
• Rack-mounting kit and rubber feet

2 Hardware Connections

1 Use an Ethernet cable to connect the ISG50 LAN-1 port to your LAN.
2 Use another Ethernet cable(s) to connect port WAN-1 and/or port WAN-2 to an Ethernet
jack with Internet access.

Use an 8-wire Ethernet cable to run your Gigabit Ethernet at
1000 Mbps. Using a 4-wire Ethernet cable limits your
connection to 100 Mbps. Note that the connection speed also
depends on what the Ethernet device at the other end can
support.
3 ISG50-PSTN: Use telephone cables with RJ-11 connectors to connect your existing
PSTN (Public Switched Telephone Network) outlet to the ISG50's FXO ports.
ISG50-ISDN: Use telephone cables with RJ-48 connectors to connect basic rate ISDN
phone lines to the ISG50's BRI ports.

ENGLISH

ENGLISH
ITSP
2
LAN
• RJ-45 Ethernet cable
• RS-232 console cable
• Quick Start Guide
1
2
• CD
• Warranty card
PSTN
ISDN
3
5
4