Samsung SCC-B2305 Manual De Utilización página 16

SHUTTER
The SHUTTER menu sets up the high speed electronic shutter, AUTO
E
low speed shutter. The high speed electronic shutter covers 7 shutter
speeds from 1/100 to 1/10K seconds and is commonly used for imaging
fast moving objects. Both the low speed shutter cover 10 shutter speeds
from x2 to x160, which slows the shutter speed to make clearer and
brighter the screen images taken in dark illumination. If you want to slow
the shutter speed automatically depending on the degree of darkness by
sensing the intensity of radiation, please select the AUTO low speed.
CAMERA ID
IRIS
BLC/WDR
COLOR/BW
SHUTTER
AGC
WHITE BAL
SYNC
SPECIAL
EXIT
If you keep pressing the LEFT or RIGHT key, the following speeds appear
in sequence.
OFF AUTO X2 AUTO X4 AUTO X6
X20 AUTO X40 AUTO X80 AUTO X160
1/500 1/1000 1/2000 1/4000
While the IRIS mode is in ELC or the BLC/WDR mode is WDR, you may
use the following modes only.
OFF AUTO X2 AUTO X4 AUTO X6 AUTO X8
X20 AUTO X40 AUTO X80 AUTO X160
30
ON...
DC...
OFF
AUTO...
OFF
---
ATW
INT
...
QUIT
AUTO X8 AUTO X12 AUTO X16
OFF 1/100(NTSC), 1/20(PAL)
1/10K OFF
AUTO X12 AUTO X16
OFF
AGC/MOTION
❿ AGC
The AGC menu lightens the screen below the standard brightness
because of the object taken in dark illumination. Setting up the AGC
menu is available only in either High Speed Shutter mode or OFF mode.
If you press the LEFT or RIGHT key to reach the LOW or HIGH position,
the AGC function will start activating. LOW is used for the lower AGC
GAIN whereas HIGH is used for the higher AGC GAIN.
While the COLOR/BW menu is set to AUTO, the AGC menu is all --- and
the maximum AGC GAIN stays at HIGH.
AUTO
1/250
AUTO
CAMERA ID ON...
IRIS DC...
BLC/WDR OFF
COLOR/BW AUTO...
SHUTTER OFF
AGC ---
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
E
31