Safety Warnings; Set Contents; User Manual - Marmitek INVISIBLE CONTROL6 Manual Del Usario

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or
bright light sources.
• In case of improper usage or if you have altered and repaired the product yourself,
all guarantees expire. Marmitek does not accept responsibility in the case of
improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage
other than covered by the legal product responsibility.
• Do not open the product: the device may contain live parts. The product should
only be repaired or serviced by a qualified repairman.
• Only connect the adapter to the mains after checking whether the mains voltage is
the same as the values on the identification tags. Never connect an adapter when it
is damaged. In that case, contact your supplier.
• This product is not a toy. Keep out of reach of children.
1. INTRODUCTION
Congratulation on buying the Invisible Control6™! With the Invisible Control6™
you can extend the IR (infra-red) signals from your own remote control. The Invisible
Control6™ gives you the opportunity to control your A/V equipment when it's stored
away in a closed cabinet or placed out of sight.
Marmitek products are manufactured with the utmost care and are exceptionally high
quality. Please read this manual carefully and follow the instructions in order to get the
best from this product.

2. SET CONTENTS

1x IR Receiver + sticky strip
1x IR Module + sticky strip
2x IR extender cables with 3 blinking LEDs
1x Power Adapter
1x User manual
INVISIBLE CONTROL6
TM