Suunto Memory Belt Manual Del Usuario página 8

ACTIVATING AND RECORDING
Suunto Memory Belt is activated and starts recording automatically when you put it on and it
starts reading your heart rate. This is indicated after about 5 seconds by a medium beep and
a medium green flash.
After activation, the green light flashes every 4 seconds to show that the device is measuring
and recording your heart rate.
If the beep and green flash do not occur when you have put the Suunto Memory Belt on,
make sure that the belt fits snugly and that the electrodes are wet. If the orange or red light
flashes, the memory or battery is low. For more information, refer to Section 4 Errors and
warnings.
6
1 medium, green
1 medium
activated, starts recording
1 green every 4 seconds
measuring and recording