A&D Medical UA-651BLE Manual De Instrucciones página 12

USING THE MONITOR
Connecting to a mobile device (Pairing)
®
A Bluetooth device needs to be paired with this blood pressure monitor
in order to communicate with that device. If this monitor is paired with a
receiver device from the start, measurement data is transmitted
automatically to the receiver device each time a measurement is made.
Tips for pairing
☞
Be sure to turn the power of all other Bluetooth
pairing. Multiple devices cannot be paired at the same time.
If the receiver device cannot receive measurement data, try
pairing once again.
☞
Communication is possible with one of the receiver devices. If a
third receiver device is paired, the device other than the most
recently connected device will be unpaired to enable the new
device to be paired.
☞
Some applications may allow pairing with only one device.
Follow the steps on the next page to pair or unpair the monitor
with a Bluetooth
manual of the receiver device. Please use a pairing wizard if one
is provided.
E-11
®
compatible receiver device. Also refer to the
A&D Medical (Toll-Free): 1-888-726-9966
®
devices off when