How To Use - IRIS WOOZOO PCF-C15T Serie Manual Del Usuario

HOW TO USE

Place the Product
Place the product upright on a stable surface and insert the power plug
into the electrical outlet.
Start the Product
Press the power button to turn the product on.
• The product will start running at the last setting used if the power
plug has not been pulled out.
• The product can also be turned on using the power button on the
remote control.
Select the Preferred Air Flow Strength
Pressing the air flow strength button lights the indicator light and changes
the air flow strength as follows:
Low Medium High
Start Timer
Pressing timer button changes the preset time as follows:
1 (h) 2 4
Timer o
The timer can also be changed using the timer buttons on the remote
control.
To turn the product off with the remote, press the button for the selected
time again.
Stop the Product
Press the power button during operation to turn the product off. The
product will beep before the power turns off.
7
Select Natural Breeze Pattern
Replicates breeze patterns by changing the strength of the air flow.
• Hold the breeze setting button for 3 seconds to start the natural breeze
pattern.
• The air flow strength can still be changed once breeze pattern has been
selected by pressing the air flow strength button.
• Hold the breeze setting button for 3 seconds again to turn the indicator
light off and return the product to normal operation.
• Three breeze pattern setting buttons on the remote automatically adjust
the breeze pattern according to air flow strength.
• To return to normal operation using the remote, please press the desired
air flow strength button.
Select Oscillation
The oscillation cannot be done manually. Please use the oscillation button to
change the angle of the product. Forcibly changing the angle will damage the
product.
Horizontal
Press the horizontal oscillation button to start product oscillation
left and right. Press the oscillation button again to stop product
oscillation.
Vertical
Press the vertical oscillation button to start product oscillation up and
down. Press the oscillation button again to stop product oscillation.
Full Oscillation
When operating in full oscillation mode, product will operate on
high, moving left, right, up, and down. Hold the vertical oscillation
button for 3 seconds to start full oscillation. After 5 minutes, air flow
strength will change to low.
Full oscillation can also be turned on using the full oscillation button
on the remote control.
To stop full oscillation, please press the vertical oscillation button.
This will return the product to regular operation.
When running vertical and horizontal oscillation at the same time, or when using the full oscillation
mode, operation is as follows:
Product oscillates left and right as well as up and down simultaneously to provide maximum air
coverage. Horizontal oscillation runs left and right continually. Vertical oscillation stops once every 20
seconds before beginning down and up oscillation again.
Hold for 3 seconds
8