Cleaning And Maintenance; Troubleshooting - IRIS WOOZOO PCF-C15T Serie Manual Del Usuario

CLEANING AND MAINTENANCE

Always turn off the power and unplug the power plug from the electric socket when cleaning the
product. Use caution, the motor will be hot immediately after use. Confirm the motor has cooled
before cleaning the product.
Caution
Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc. when cleaning the
product. Using such substances can cause damage, malfunctions, or changes in color, shape, and
quality.
Using the product in dusty condition can cause it to malfunction. Check and clean the product regularly.
Internal Cleaning
1 Unscrew the screws from the back cover of the fan.
Press in and disengage the 4 claws on the top and
bottom of the front guard, and then remove the
front guard by pulling it toward you.
2 Remove debris using a vacuum cleaner. Wipe off
debris that cannot be removed by vacuuming using
a soft cloth.
3 Align claws on the top and bottom of the front
guard with the guides on the back of the guard,
and press until it snaps into place.
External Cleaning
• Wipe lightly using a soft cloth.
• For hard to remove dirt, wipe using a cloth containing a
diluted neutral detergent.
Screw
Screw
CLAWS
Front Guard
Vacuum
Claws
9

TROUBLESHOOTING

Before making repairs, please read the following content carefully to fix common problems.
STATUS POSSIBLE CAUSE
No power
Power plug is not securely plugged into
(Indicator is off)
the electric socket.
Battery power is low.
Direction of polarity of the battery is
placed incorrectly.
Product operation cannot be
Something is blocking the infrared
controlled by remote
sensor and the remote receiver.
The remote isn't facing the correct
direction.
The product is placed on an uneven
Product makes loud noise surface.
while operating
The front guard is not securely attached. Attach the front guard properly.
Low air flow strength
Dust has accumulated.
Product makes loud noise
During oscillation, motor sounds will
while oscillating
increase.
Problems that could not be resolved.
Please contact the dealer of purchase or IRIS USA, Inc. Customer Service.
Warning: Do not disassemble, repair or modify the product yourself. Any other servicing should be performed by any
authorized service representative.
Product Used Over Long Periods of Time
If any of the following problems occur due to use over long periods of time, cut power immediately, unplug from the electric
socket, and contact IRIS USA, Inc. customer service at 1-800-320-4747.
• There is no response when power switch is pressed.
• Product makes a strange noise when operating.
• While turning, the vane changes speed irregularly.
• Power cord is bent or damaged.
• Power turns on and off when power cord is touched.
• Product gives off a burnt smell.
Various factors can have an impact on the product degradation and malfunction.
WARNING
If abnormalities like those listed above occur even when the product has not been used
for the displayed standard period of use, stop use immediately and contact IRIS USA, Inc.
customer service at 1-800-320-4747.
REMEDY
Please plug the power plug securely into
the electric socket.
Please insert a new battery.
Please ensure the battery is inserted
correctly.
Please ensure there is a clear path
between the sensor and the receiver.
Point the sensor on the remote at the
remote receiver on the main body from
a maximum of 16.4 ft/5.0 m away.
Place the product on a level, stable
surface.
Please clean to remove the dust.
This is normal.
10