USRobotics 5465 Guía Breve De Instalación página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
The Setup Wizard will attempt to automatically detect your Internet connec-
tion. If your connection cannot be automatically detected, you can manually
enter your connection information. If you are unsure about any required con-
nection information, contact your Internet Service Provider (ISP).
4. After the initial configuration, the router will reboot and you will be directed
to the Status page.
For expanded Setup Wizard details, see the User Guide on the USRobotics Instal-
lation CD-ROM.
Point-to-Point Tunneling (PPTP) Users:
If your ISP uses a PPTP connection, you will need to perform the following
additional steps to complete your Installation procedure and create an Inter-
net connection. If you have any questions regarding any of your PPTP con-
nection settings, contact your ISP.
1. In the router configuration pages, click the Internet tab and scroll down
to the Point-to-Point Tunneling (PPTP) section.
2. Select the My ISP uses a PPTP connection checkbox.
3. Enter your Domain or IP address of your PPTP server in the Domain
field, and the User name and Password from your ISP. If your ISP uses
a specific authentication method, either select or deselect the appropriate
checkboxes.
4. When you are finished, click Save. The router will restart and you should
then have an Internet connection. You can go to the Status page to view
your connection information.
Back Up Your Configuration Settings
Having a backup reduces the effort required in reapplying your configuration set-
tings should you ever restore your router to its factory default settings. USRobot-
ics recommends that you back up your settings now.
1. In the router configuration pages, click the Device tab and scroll down to
Back Up Settings.
2. Click Back Up.
3. Your system will prompt you to save or open the file. Select Save.
C o n g ra t u l a t i o n s . You have successfully completed the installation proce-
dure. You can verify your Internet connection by registering your Wireless
MAXg Router at www.usr.com/productreg/.
English
5

Publicidad

Tabla de contenido
loading

Tabla de contenido