Standard Tank Connection - Everbilt AUTOJ100A2 Guía De Uso Y Cuidado

Discharge Pipe and Pressure Tank Connections (continued)

STANDARD TANK CONNECTION

Install a tee in the pump discharge port.

Run a pipe from the pump discharge port to the inlet port of your tank. The pipe size must be at least as large as the discharge port.

Install a tee with reducing bushings in the suction pipe as shown.

Install a barbed fitting in the smallest bushing(1/8" NPT).

Run the AVC tubing from the barbed fitting on the suction pipe tee to the port in the AVC mounted on the tank. See the instructions

provided with the tank and the AVC for details. The AVC port location may vary.
Congratulations! You have just completed the tank connection for your jet pump.
11
Please contact 1-844-241-5521 for further assistance.
HOMEDEPOT.COM