Cotter Pin; Large Flat Washer; Axle Clamp - SNOWJOE SJGC7 Instrucciones De Seguridad

Fig. 15
Axle
17. Insert a cotter pin into the inner hole on the axle, and bend
each tip of the cotter pin outward and backward around
the axle to secure it (Fig. 16).
Fig. 16
Cotter pin tips
18. Then place a large washer, an inflated wheel, and another
large washer onto the axle (Fig. 17).
Fig. 17
Large washer
19. Secure the wheel with another cotter pin on the outer hole
at the end of the axle (Fig. 18).
Axle clamps
20. Repeat steps 17 – 19 to assemble the other wheel.
21. Tighten the two nuts on the axle clamps on both sides
22. Turn cart right side up so the cart rests on its wheels. Slide

Cotter pin

Wheel
Large
washer
7
Fig. 18
Nuts
(Fig. 18).
the front panel in to complete assembly (Fig. 19).
Fig. 19
Cotter
pin
Front
panel