this device is supplied with the battery inserted. When
using the device for the first time, check the battery level
and fully charge the battery before using the device if
necessary.
Inserting the battery
1 Align the arrows correctly and insert the battery into
the module in the order indicated in the image.
2 Grab the lower part of the module as shown in the
figure below, then gently slide the module into the
device until they are tightly fastened.
Module eject key
• Never press the module eject key when inserting the
module into the device.
• When inserting the battery into the device, make sure
the battery is attached to the module.
3