WALL SET INSTALLATION (Continued)
11. Apply Sealant
◘
Remove tape.
APPLY SEALANT
to all seams.
◘
Make connections to water supply lines and check for
leaks.
Follow manufacturer's instructions for
IMPORTANT!
sealant dry time before use.
CARE AND CLEANING
For regular cleaning use ONLY mild detergents or warm, soapy water. Use
ONLY non-abrasive cloth or sponge. Always rinse surfaces after cleaning.
Before cleaning this product with cleaning products, test a small,
inconspicuous area.
Manufacturer does not recommend the use of cleaning
!
products that contain any of the following chemicals. Use of
products containing these chemicals can cause the products to
crack or discolor and will void the warranty.
• Naphtha
• Amyl Acetate
• Hydrogen Peroxide Solution (common household peroxide)
• Toulene
• Ethyl Acetate
• Lye (common in drain cleaner)
• Acetone
IMPORTANT: If the building owner or homeowner elects to use a RUBBER
FLOOR MAT with suction cups or a standard RUBBER FLOOR MAT in their
shower base, it is recommended that the mat be removed after each shower,
the shower wiped dry, and the rubber mat allowed to dry before re-use. A mat
of this type may cause fungus or mold to grow under the suction cups, and
damage in the form of surface blisters in the bottom of the shower following
prolonged use if not dried properly.
6
B27778 Rev. B 5/9/16