jbc DM 6700 Manual De Instrucciones página 10

ENGLISH
ADVANCED HANDPIECES RANGE
All the Advanced series soldering
handpieces can be connected to the
DM 6700 station.
For a soldering handpiece to work
properly, the following components are
required: a control unit, a handpiece
and the corresponding stand and
cartridge.
These articles are not included with the
station and are
accessories.
The soldering iron is connected to the
station in the following way:
The cable connection of the soldering
iron is connected to the plug in the
soldering iron stand and the cable
connection of the soldering iron stand
can be connected to any of the four
connectors at the back of the station.
There is a diagram of the connection
on the device.
HOT TWEEZERS
DM 6700 station allows you to connect
two different models of tweezers,
each one with its respective range of
cartridges and stand:
- PA 1200 micro hot tweezers ref.
1200000.
- PA 4200 hot tweezers ref. 4200000.
For tweezers to work properly, the
following components are required:
control unit, hot tweezers, a stand and
a set of cartridges corresponding to
the chosen tweezer.
The tweezers are connected to the
station in the following way:
The cable connector from the tweezers
is plugged into the connector on the
stand. The cable connector on the
stand can be connected to any of the
four connectors at the back of the station.
There is a diagram of the connection on
the device.
soldering iron stand
available as
2210 handpiece
Cartridges for the PA 4200
hot tweezers
AD 8210
Ref. 0788210
Ref. 2210000
2210 cartridges
2245 handpiece Ref. 2245000
PA 8120
hot tweezers
stand
Ref. 0748120
PA 4200
hot tweezers
Ref. 4200000
8
Tool connectors
AD 8245
soldering iron stand
Ref. 0788245
2245 cartridges
Tool connectors
PA 8110
hot tweezers
Ref. 0748110
PA 1200
micro hot tweezers
Ref. 1200000
1200 cartridges
stand