Accessories; Scope Of Supply; Warnings - Cooper Weller WSD 50 Instrucciones Para El Manejo

The WELLER soldering stations WSD 80 and WSD 50 are in compliance with the EC
by Directives 89/336/EEC and 73/23/EEC.
6.

Accessories

529 161 99
Soldering iron set WSP 80 (WSD 80 only)
5 3 3 1 1 0 9 9 Soldering iron set MPR 30
5 3 3 1 1 1 9 9 Soldering iron set MLR 21
5 33 112 99 Soldering iron set LR 21, antistatic
5 3 3 1 1 3 9 9 Soldering iron set LR 82 (WSD 80 only)
5 3 3 1 2 0 9 9 Soldering iron set WT 50
5 1 3 0 5 0 9 9 Reflow soldering unit EXIN 5
5 27 026 99 Preheating plate WHP 50
5 2 7 0 2 8 9 9 Preheating plate WHP 80 (WSD 80 only)
5 25 030 99 Thermal insulating unit WST 20
5 33 229 99 External input unit WCB 1
5 3 3 1 8 0 9 9 External input unit WCB 2

7. Scope of supply

WSD 80
Control unit
Soldering iron WSP 80
Power cable
Operating instructions
Soldering iron rest
Illustration: Circuit diaqram, see Page /
Illustration: Exploded view, see Page 54+55
8.

Warnings

1. Keep your work area in proper Order.
Always return the soldering tool to its original holder when not in use. D
combustible materials near the hot soldering tools.
5 WSD 0
Control unit
Soldering iron LR 21
Power cable
Operating instructions
Soldering iron rest
not bring
O
2. Take care for the surroundings.
Don' t use the soldering tool in a moist or wet environment
3. Protect yourself against electrical shocks.
Avoid touching grounded Parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.
4. Keep children ata distance.
Don' t allow other persons to tauch or disturb the soldering tool or Cord. Keep other
persons away from your work area.
5. Store your soldering tool in an appropriate place
6. D not overload your soldering tool.
O
range.
7. Use the appropriate soldering tool.
Don' t use a soldering tool whose Performance is not adequate for your work. Never
use the soldering tool for purposes for which is was not designed.
8. Wear suitable work cloths.
protective clothing in Order to protect yourself against burns.
Wear protective eyewear. When working with bonding agents, it is particularly important
against spattering solder. There is a danger of burning yourself with liquid solder.
10. Use a soldering vapour suction device
correctly used.
11. D
O
25