OPERATION ______________________________
Toasting frozen bread
1
Follow the steps from 1 to 4 at the "Toasting"
section.
2
Press the defrost button
– The indicator light of the defrost button
illuminates and the toasting process begins.
Note
When the defrost button
7
toasting process takes longer than with normal
toasting.
3
The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
B
button
light go off. The toast slices are
F
pushed upwards and can be taken out of
the toaster.
Notes
To cancel the toasting process before it has fin-
7
ished, press the stop button
springs back up and the toast slices can be
B
taken out of the toaster.
Caution
Be very careful when taking the toast slices out
7
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
4
Disconnect the appliance from the wall socket.
Warming up already
toasted bread
1
Follow the steps from 1 to 4 at the "Toasting"
section.
2
Press the reheat button
– The indicator light of the reheat button
illuminates and the warming up process be-
gins.
22 ENGLISH
.
F
is pressed, the
F
springs back up; defrost
. The start lever
E
.
G
3
The appliance automatically switches off as
soon as the set degree of warming has been
reached. The start lever
reheat button
are pushed upwards and can be taken out of
the toaster.
F
Notes
To cancel the toasting process before it has fin-
7
ished, press the stop button
springs back up and the toast slices can be
B
taken out of the toaster.
Caution
Be very careful when taking the toast slices out
7
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
4
Disconnect the appliance from the wall socket.
Warming up buns
This toaster is equipped with an external warming
rack
.
I
Notes
Do not toast bread and warm up buns at the
7
same time.
Do not warm up toast slices on the warming
7
rack
. The toast slices hinder sufficient ven-
I
tilation.
If you accidentally activate the wrong mode
7
(defrost instead of reheat or reheat instead of
defrost), then the selected mode must be can-
celled first by pressing the stop button
fore you can select the right mode.
1
Put the warming rack on the housing
place it into the gaps
2
Place the buns on the warming rack
3
Connect the power plug into the wall socket.
G
4
Using the browning control
sired degree of warming.
5
Press down the start lever
– The indicator light of the stop button
luminates and the warming up process be-
gins.
springs back up;
B
light go off. The toast slices
G
. The start lever
E
select the de-
D
.
B
be-
E
and
C
.
I
il-
E