Setting The Continuous Snapshot Picture Mode; Taking Three Continuous Pictures - Disney DDC9000-P Guia Del Usuario

SETTING THE CONTINUOUS SNAPSHOT PICTURES MODE
1
Turn the camera
described on page 8. Press the
Mode/Power button three times
to select the Video mode; "d8"
will appear in the display.
NOTE :The Continuous Snapshot Pictures function is only available for Lo
(Low) image quality mode. If you using this function while in Hi(High) image
quality mode, when you take the pictures, the unit will change to (Lo) Low
image quality mode automatically. When you release the Shutter/Select
button. It will stop taking photos and returns to Hi (High) image quality mode.

TAKING THREE CONTINUOUS PICTURES

1
Turn the camera on as described
above. Press the Mode/Power
button four times to select the
Three Continuous Pictures mode;
"CS" will appear in the display.
NOTE: The Three Continuous Pictures function is only available for HI (High)
image quality mode. If you using this function while in Lo (Low) image quality
mode, when you take the pictures, the unit will change to Hi (High) image quality
mode to take 3 pictures automatically then revert to Lo (Low) image quality mode.
O P E R ATION (CONTINUED)
on
2
Within three seconds, press and hold
the Shutter/Select button to start taking
as
continuous pictures. For this function,
the counter will rapidly decrease.
When you release the Shutter/Select
button, it will stop taking photos and
the counter will shown the remaining
photos number in the display.
2
Within three seconds, press the
Shutter/Select button to
taking three continuous pictures.
The LED will blink three times and
the counter will decrease by three.
10
start