Setting The Image Quality Mode - Disney DDC9000-P Guia Del Usuario

SETTING THE IMAGE QUALITY MODE

Select the desired resolution as shown below, Hi (640 x 480 pixels)
or Lo (320 x 240 pixels) as follows:
1
Turn the camera
described on page 8. Press the
Mode/Power button seven times
to select the Image Quality; "Hi"
or "Lo" will appear in the display.
NOTES:
•
Lo(w) Resolution file size is smaller, but the quality is not as
good as Hi(gh). Lo(w) is ideal for e-mailing.
•
The capacity for pictures in Lo(w) Resolution is 100; and for
pictures in Hi(gh) Resolution is 25.
O P E R ATION (CONTINUED)
on
2
as Within 3 seconds, press the
Shutter/Select button to select
the Quality mode as shown on
the display i.e. if Lo appears,
press the Shutter/Select button
to change the setting to Low.
12