General Information; Package Content - WEG ECO1 RS232 Guía De Instalación, Configuración Y Operación

Do not perform any high pot tests with the servo drive!
NOTE!
Servo drives may interfere in other electronic equipment. Follow the recommended
procedures to minimize these effects.
NOTE!
Read the user's manual completely before installing or operating the servo drive.

2 GENERAL INFORMATION

This guide contains information regarding the installation, configuration and operation of the
ECO1 optional module. This module is an expansion of RS232 and RS485 communication, both
isolated and used by the SCA06.
ATTENTION!
De-energize the control module before inserting or removing the accessory.
NOTE!
The accessory ECO1 can be connected to Slot 1 and Slot 2.

3 PACKAGE CONTENT

Accessory module in anti-static package.
„
Installation, configuration and operation guide.
„
Expansion Module for Communication RS232 and RS485 - ECO1
If necessary, contact WEG.
SCA06 7