Accessory Installation - WEG ECO1 RS232 Guía De Instalación, Configuración Y Operación

Expansion Module for Communication RS232 and RS485 - ECO1

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the servo drive control module.
2. Remove the slot protective cover, as shown in figure 4.1.
Figure 4.1: Remove the protective cover
3. Connect the accessory to the appropriate slot, as illustrated in figure 4.2. Remember that the
accessory ECO1 can only be connected to either slot 1 or slot 2.
Figure 4.2: Accessory installation
8 SCA06