Tabla de contenido
Publicidad
Especifi cações
430 530
Dispositivo de captação de imagem
Elementos de imagem efectivos
Resolução Horizontal
Dia/Noite
ICR
Iluminação mínima
Obturador electrónico automático
Ajuste automático da íris
Característica Gamma
Encaixe da lente
Controlo de ganhos automático
Equilíbrio de brancos automático
Compensação de luz de fundo
Sistema síncrono
Saída de vídeo
Fonte de alimentação
12 VDC ±10%
Consumo energético
12 V = 99 mA
Temp. de funcionamento
430 532
Alta resolução 1/3" a cores CCD
PAL: 752 x 582 (H x V)
540 linhas de TV
Sim
Não
0.2 LUX @ F1.2
PAL:1/50~1/110,000
Lentes de vídeo e lentes DC suportadas
0,45
Encaixe C ou CS ajustável
Sim
Sim
LIGADO/DESLIGADO comutável
Interno
1 Vp-p / 75 Ohms. Sinc. negativa
110 - 230 V~
230 V~
4.1 mA (0,94 W)
-10 °C a 50 °C
115 mm
Camera to be fi tted
SAFETY PRECAUTIONS
•
Please do not directly touch the sensor element.
If necessary, use a soft cloth moistened with alcohol to wipe off any dust.
•
Please be extra careful not to shake the camera
•
Please avoid places where there is direct sunlight
•
When using this camera in places where the lighting differs greatly, please use an auto iris lens.
•
Please avoid places where temperatures exceed 50° C or more, high humidity or where direct rain drops hit, frequent
vibrations, or shocks occur.
•
During the night, if a minimum brightness of 0.2 Lux can not be achieved, install appropriate light fi xtures.
•
When the camera is not used, keep the lens or the lens cap attached to protect the sensor.
Features
•
Sony Super HAD CCD sensor in metal case.
•
Employs Digital Signal Processor (DSP) chip-set for image control.
•
Pixel number: PAL=440K (EIA=380K/ CCIR=440K) for high resolution models,
and PAL=320K (EIA=270K/ CCIR=320K) for normal resolution models.
•
High sensitivity, low smear, high anti-blooming and high S/N ratio.
•
Powerful functions:
Auto Electronic Shutter (AES),
Auto Iris (AI),
Auto Gain Control (AGC),
Auto White Balance (AWB),
and Back Light Compensation (BLC).
•
Supports Auto Iris Lens: both Video-Drive & DC-Drive lens.
•
Supports both C and CS mount lens.
Safety instructions
This product should be installed in line with installation rules, preferably by a qualifi ed electrician. Incorrect installation and use can lead to risk of electric shock or fi re.
Before carrying out the installation, read the instructions and take account of the product's specifi c mounting location.
Do not open up, dismantle, alter or modify the device except where specifi cally required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained
and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
Mounting Block (optional)
L-Wrench
Screws (optional)
Publicidad
Tabla de contenido
