Apex Medical DOMUS AUTO 9P-077520 Manual De Instrucciones página 10

English
English
NOTE:
CAUTION:
NOTE:
NOTE:
3. Connect air hose connectors from air mattress to the
pump unit. When a "click" sound is felt or heard, the
connection is completed and secured.
4. Plug the power cord into electrical outlet.
5. Then turn the main power switch to ON position.
You can unplug the unit to power-off the device.
The pump supplied with the mattress can only be used for mattresses
recommended by the manufacturer. Do not use it for any other purpose.
(applied part: air mattress)
(For models WITHOUT the low-air-loss function) During power outages, you
can cover the Quick Connector with the transport cap to maintain air pressure
inside the air cells.
After installation, make sure any excess cord or tubing is removed from
possible foot traffic to avoid accidental tripping. All EQUIPMENT should be
positioned to always allow unhindered patient access by physicians and
caregivers.
NOTE: Check and ensure the air hoses are not
kinked or tucked under mattress.
NOTE:
1. Make sure the pump unit is suitable for the local
power voltage. Do not position the equipment
so that it is difficult to operate the disconnecting
device
2. The plug is also used to disconnect the device.
CAUTION: The pump can only be applied to the
mattress
manufacturer. Do not use it for any
other purpose. (Applied part: air
mattress)
8
recommended by the