General Operation - Apex Medical DOMUS AUTO 9P-077520 Manual De Instrucciones

English
English
4. OPERATIONS
NOTE: Always read the operating instructions before use.

4.1 General operation

4.2 Emergency CPR Operations
CPR must be performed on a firm surface. Therefore, if an
emergency CPR situation occurs with the patient on the
mattress, the mattress must be quickly deflated. This is
done by quickly pulling on the CPR tag located at the head
of the mattress on the patient's right-side. The quick
connector found from the pump unit can also be
disconnected to hasten deflation.
1. Switch on the main power switch found on the
side of the pump.
2. Once the pump begins delivering air into the
mattress it will take approximately 30 minutes to
fully inflate the mattress.
3. Every time when mattress is first setup for use, It
will be forced to execute Maxfirm for the quickest
inflation. The low-pressure indicator (yellow LED)
will light up when the mattress is not fully inflated
at initial inflation. If the appropriate pressure is
reached, the low-pressure indicator (yellow LED)
will go off.
4. When the initial inflation (Maxfirm process) is
completed, the system will automatically enter
the Auto-Adjust process.
5. According to the weight and height of the patient,
the system will
appropriate pressure setting to ensure the
patient's comfort, and then enter to alternating
mode.
9
automatically adjust an