Rigol DG1000Z Serie Manual De Uso página 148

Chapter 2 Front Panel Operations
pulse ManualIP to select "On" or "Off" to turn ManualIP mode on or off.
⚫
The default is "Off". If all the three IP configuration modes are "On", the
priority of parameters configuration from high to low is "DHCP", "AutoIP"
and "ManualIP". Therefore, to enable this mode, set DHCP and AutoIP
as "Off".
The IP address format is nnn.nnn.nnn.nnn. The first nnn ranges from 1 to
⚫
223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available IP address from their
network administrator.
Pulse IP Address and use the direction keys and numeric keyboard or
⚫
mando to enter your desired IP address. The setting is stored in non-
volatile memory and will be loaded automatically when the generator is
powered on the next time if DHCP and AutoIP are set as "Off".
TIPS:
If all the three IP configuration modes are "On", the priority of parameters
⚫
configuration from high to low is "DHCP", "AutoIP" and "ManualIP".
The three IP configuration modes cannot be set as "Off" at the same time.
⚫
To Set Subnet Mask
In ManualIP mode, the subnet mask could be manually set.
The format of subnet mask is nnn.nnn.nnn.nnn, wherein nnn ranges from 0 to
⚫
255. It is recommended that users acquire an available subnet mask from their
network administrator.
pulse SubMask and use the direction keys and numeric keyboard or mando to
⚫
enter your desired subnet mask. The setting is stored in non-volatile memory
and will be automatically loaded when the generator is powered on the next
time if DHCP and AutoIP are set as "Off".
To Set Default Gateway
In ManualIP mode, the default gateway could be manually set.
The format of default gateway is nnn.nnn.nnn.nnn, wherein the first nnn
⚫
ranges from 1 to 223 (except 127) and the other three nnn range from 0 to
255. It is recommended that users acquire an available default gateway from
their network administrator.
DG1000Z User's Guide
RIGOL
2-106