Roca MBDLE 055 D01 Manual De Instrucciones página 3

KEY TO LAY-OUT
1 – Pressure gauge
2 – Pressure gauge
3 – Brake adjustment
4 – Valve adjustment
5 – Snubber adjustment
6 – Gas pressure switch
7 – Gas-in flange
8 – Flange fixing screws
9 – Pressure gauge
10 – Coil
Fig. 1
7
TYPE
MULTIBLOC
MBDLE 055 D01
INSTALLING THE GAS TRAIN
The gas train leaves the factory ready for installation to the burner's left. If it is to be installed on the
right, fit the valve turned by 90° with respect to the gas-out flange (9).
Connection between the gas supply line and train must be made using the gas-in flange (7) supplied,
and fastening screws (8).
Do not, under any circumstances, install the valve with the coil (10) facing down.
2649
st
1 STAGE GAS TRAIN
10
8
6
CONNECTIONS
Ø 1
NETWORK BURNER
Rp 1 / 2 Flange 1
MAXIMUM SUPPLY PRESSURE: 65 mbar
COMPONENTS
The Multibloc is composed by:
1 – Filter
1 – Gas pressure switch
1 – Pressure stabilizer
2 – Solenoid valves:
– safety valve with fast opening
– adjusting valve with slow opening
3
9
1
B
DIMENSIONS
Ø 2
A
155
1 GB
143040163
2
5
4
Ø 2
D4062
WIRING
CONNECTIONS
B
232 6 pin plug