Cables, Extensions And Plugs; Removing Sawdust Generated During Use - Kunzle & Tasin Bona CombiEdge Short Manual De Funcionamiento

Ocultar thumbs Ver también para Bona CombiEdge Short:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
Commencing Operation (Cont.)
Instructions for electrical connection (cont.)
If the machine is not connected correctly to the electricity network,
death due to electrocution may occur. To prevent electric shocks
always use a grounded three wire electrical system. For maximum
protection against electric shocks use a circuit protected with a
differential cut-out switch.
DO NOT use the machine if the switch malfunctions.
Tampering with the grounding plug in any way may result in death
from electrocution. DO NOT cut, remove or break the grounding
plug. If the socket does not match the plug consult a qualified
electrician.

Cables, extensions and plugs

Only use approved cables. The maximum
recommended cable length is 7.62m (25'); for greater
lengths use the Power Station.
MACHINE WITH 115V~60Hz MOTOR
For machines with a 115V~60Hz motor (US) an HAR
14/3-approved power supply cable must be used along with
an approved 15A 125V TWIST LOCK plug.

Removing sawdust generated during use

8
Bona
CombiEdge™ Short/Long Manual
®
If the machine is used with a damaged plug
or power supply cable, death may occur from
electrocution. If cables or plugs are worn or
damaged in any way, have them replaced by
the manufacturer or certified machine repair
center in order to prevent risks to safety.
Using the machine with unsuitable and/or excessively long
cables may cause injury or damage to people or objects.
The machine must never be moved using its cable and
the cable must never be pulled when disconnecting from
the socket. Keep the cable away from sources of heat, oil
and sharp edges.
Sawdust can ignite spontaneously and cause injury
or damage. It must be disposed of properly. Always
empty sawdust into metal containers located outside
the building. Empty the contents of the dust bag when
it is 1/3 full. Empty the dust bag at the end of each
machine use. Never leave the dust bag unattended when
it contains sawdust. DO NOT empty the contents of the
dust bag above a fire.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bona combiedge long

Tabla de contenido