Photo Mode; Time Lapse Mode - Rollei 425 Manual De Instrucciones

This camera automatically stops recording when
saved before the camera powers OFF.

PHOTO MODE

To capture a photo, verify the camera is in photo
mode. If the photo icon on your camera's LCD
screen is not showing, press the Power/Mode
Button repeatedly until it appears.
Press the Shutter/Select Button. The camera will
emit the camera shutter sound.
BURST PHOTO MODE
Burst photo
To capture a burst photo series, verify the camera
is in burst photo mode. If the burst photo icon on
your camera's LCD screen is not showing, press the
Power/Mode Button repeatedly until it appears. In
1.5 seconds.
To take a burst photo series:
Press the Shutter/Select Button. The camera will
emit camera shutter sounds.

TIME LAPSE MODE

Time Lapse
To capture a time lapse series, verify the
continuous lapse is ON and camera is in time lapse
mode. If the time lapse icon on your camera's LCD
screen is not showing, press the Power/Mode
Button repeatedly until it appears. In time lapse
mode your camera captures a series of photos at 2,
To take time lapse:
Press the Shutter/Select Button. The camera
initiates countdown and emits the camera shutter
sound each time a photo is taken.